#whitesalesuk
em.glaze flat glass Premium
em.glaze flat glass rooflights are high-quality, aesthetically pleasing prefabricated flat glass rooflights.
Available in a wide range of sizes or made to measure, em.glaze flat glass Premium rooflight provides a clean, minimalistic finish inside and out. Manufactured with flat sealed glass units, each rooflight incorporates a fully welded thermally broken aluminium frame and cill detail. All visible aluminium is polyester powder coated to Anthracite Grey RAL 7016 as standard or can be powder coated to a specific RAL colour if required.
- Flush glazed glass-to-edge design
- Non-fragile to CWCT Class 1 tested as standard
- Good thermal and sound insulation properties
- Factory pre-glazed for easy installation
- Ventilation options available
- Secure, welded glazing frame
- Standard frit width – 84mm
- Compatible with builders and uPVC upstands
- Thermally broken frame
- Aluminium frame powder coated to any RAL colour
- em.glaze EasyClean available on short lead time
- 14 stocked sizes available for 3-5 day delivery time
S2 600 600
S4 700 700
S5 800 800
S7 900 900
S8 1000 1000
S9 1100 1100
S11 1300 1300
S13 1500 1500
S17 2100 2100
R5 700 1000
R6 700 1300
R7 800 1100
R16 1000 1300
R17A 1100 1600
R19 1100 2100
R6M 700 2500
R22z 1100 3100
R30a 1600 3100
Certification & Performance
*Thermal transmission refers to U-Values. For Ud-Values, please contact us.
All em.glaze flat glass modular rooflights, when installed on em.curbs in accordance with manufacturer’s instructions, are guaranteed for a period of ten years. For further information contact us.
Glazing
Double glazed em.glaze modular flat glass rooflights are manufactured with 32mm hermetically sealed Low E, argon filled units as standard, with a warm edge spacer, providing a high-performance system.
Finish
The glass can be finished as Clear for highest light transmission or Opal Diffused for increased security. Solar Control and Self-Cleaning coating options are also available and can be combined if both are required.
Available options:
- Clear
- Opal Diffused
- Solar Control
- Self-Cleaning
Upstands
em.glaze flat glass modular rooflights are designed to be used in conjunction with em.curb upstands and can also be installed to existing builder’s upstands. For both options we recommend that the units are installed to a pitch of between 5˚ and 15˚.
em.curbs represent excellent value for money and enhance the overall appearance of the rooflight.
- em.curb ECO uPVC 150mm Splayed
- em.curb ECO uPVC 150mm Vertical
- em.curb ECO uPVC 300mm Splayed
- em.curb ECO uPVC 350mm Oversleeve Splayed
- NEW em.glaze Timber Sloping Kerb
For full details on the performance of the upstand options available, see em.dome Upstands
The em.glaze Timber Sloping Kerb is ensures every em.glaze rooflight is fully compliant with Part L and B of Building Regulations, and supplied pre-assembled to reduce installation time on site.
em.collars are also compatible with this product and provide a thermally broken solution for replacing existing rooflights. They would typically be installed to an existing or newly formed builder’s upstand where the dimensions do not suit a standard sized em.glaze flat glass modular rooflight.
Ventilation
em.glaze flat glass modular rooflights are available with any ventilation type, smoke ventilation and manual or electric roof access.
Options available:
- Permanent Trickle
- Controllable Trickle
- Controllable Rotating
- Hinged Manual Spindle Opening
- Hinged Electric Actuator Opening
- Powered Ventilation
- Smoke Ventilation
- Manual or Electric Opening for Access
- Frame Aluminium
- Gas: Argon
- Warm spacer
- Toughened outer pane
- Laminated inner pane
- Thermal break + box section
- Install pitch (upstand): 5–15° recommended
- Standard frit width 84mm
- External frame colour RAL 7016 anthracite grey or any standard RAL colour
- Ud-value (complete glass unit tested vertically) 1.23 W/m2K
- Non-fragility CWCT TN66/67: Class 1
- Airtight BS6375-1:2015 and BS EN 12207: Class 2 300 Pa
- Wind loads BS 6375-1:2015 and BS EN 12210: Class A2
Build your product
in the click of a button
in the click of a button
Reliable. Unique. Fast. User-friendly. Specifier. That's what RUFUS stands for. Our online product configurator allows you to build an exact product specification in just a few clicks - helping you find what you need with complete confidence. Simply select your preferred options in a maximum of seven easy steps, and RUFUS will automatically generate a unique assembly part code that you can use to order the exact product you want.
Configure the product you need right now!
